110kV/220kV Substation Series Testers

  • 30meters Ultrasonic Partial Discharge Tester GTPD-3
  • 30meters Ultrasonic Partial Discharge Tester GTPD-3
30meters Ultrasonic Partial Discharge Tester GTPD-330meters Ultrasonic Partial Discharge Tester GTPD-3

30meters Ultrasonic Partial Discharge Tester GTPD-3

  • Camera and laser detector
  • Embedded GPS receiver
  • Ultrasonic&audible sound signal
  • Temperature and humidity detectable
  • Product description: GTPD-3 handheld Patrol Ultrasonic partial discharge detector (partial discharge tester,PD tester) is a detection device which can diagnose hidden trouble of power line by collecting and analyzing the
  • INQUIRY

Hazards of Partial Discharge(PD)

According to the definition of the International Electrotechnical Commission IEC 60270, partial discharge (PD) is a localized electrical discharge that only partially bridges the      insulation between conductors and which may or may not occur adjacent to a conductor.

The harm of partial discharge to insulation includes the following aspects:

1. Charged particles (electrons, ions, etc.) impacting on insulation and destroying its molecular structure, which results in insulation damage;

2. Because of the impact of charged ions, the partial temperature of insulation rises, which easily leads to insulation overheating and carbonization in serious cases;

3. The continuous development of partial discharge will lead to insulation deterioration. The damage gradually enlarges, and ultimately shortens the normal life of insulation,    reduces the short-term insulation strength, and may even cause the whole insulation to break down.


The fault detection of high-voltage transmission lines and distribution systems is a big challenge for insulation maintenance personnel. The main problem is the corona phenomenon. When the electric field strength ionizes the air molecules around the insulator, a chemical reaction will occur, which will corrode metal parts and weaken the ability of the insulating compound. The high energy produced by the corona discharge will cause serious damage to the line accessories, and serious fire and explosion        phenomena can occur.


The application of traditional infrared imaging technology can find hot spots that cannot be detected by the naked eye. However, corona, arc, electric tracking and other            phenomena are not necessarily accompanied by obvious heating, and the high temperature of the environment will also cover these phenomena, and control the equipment      in the cabinet. It cannot be found with an infrared camera. However, these phenomena will produce obvious ultrasonic noise, which can be detected by the ultrasonic partial    discharge detector. The ultrasonic inspection system completes the insulation inspection work, allowing humans to detect the sound of insulators, wire sleeves, transformers,    end sleeves, lightning rods and other faults.


GTPD-3 Handheld Patrol Ultrasonic partial discharge tester:

The significant dangers of partial discharge (PD) are well known; however, high-altitude, long-distance, and non-visible inspections of PD are often less effective. Therefore, utilizing ultrasound for partial discharge testing is an effective method. With a detection range of up to 30 meters, it can cover the majority of electrical equipment, enabling rapid and accurate identification of partial discharge fault points while ensuring the safety of testing personnel. This method overcomes the significant limitation of infrared testing, which can only be conducted under visible conditions, and is also cost-effective, making it ideal for budget-conscious electrical maintenance and repair companies.

GTPD-3 partial discharge tester is a detection device which can diagnose hidden trouble of power line by collecting and analyzing the abnormal ultrasonic signal of power line. It is also suitable for partial discharge detection of insulator, cable terminal, high voltage bushing, CT\ PT, lightning arrester, switch, etc. This device realizes the location and type of fault hidden danger with the power line and equipment in live state.


Functions and Features:

1. Portable design, small size, light weight, easy to carry. It can be working on vehicles with a speed of 30km/h.

2. It is easy to locate, focus and take photos on the fault of the equipment through camera and laser detector,

3. The screen of GTPD-3 partial discharge tester is a color touch type, which can display waveforms, dB values, temperature, humidity and GPS information.

4. The detected abnormal ultrasonic signal can be converted into audible sound signal and waveform output.

5. Embedded GPS receiver automatically stores coordinate data and provides GPS navigation function to facilitate inquiry and preservation of detection paths.

6. GTPD-3 partial discharge tester has the function of detecting temperature and humidity, and can detect temperature and humidity in real time.

7. With data storage function, data playback can be realized.

8. High sensitivity, directivity , it can locate the fault accurately.

9. GTPD-3 partial discharge tester is suitable for noise environment and is not affected by environmental noise.

10.Early detection of faults can be detected prior to other detection methods such as infrared detection.

11. By the non-contact live detection method, detection distance of partial discharge detector can reach to more than 30 meters, safe and reliable, without affecting the normal operation of equipment.


Technology specification of GTPD-3 partial discharge tester:


Operation System

WINCE6.0, CPU 533MHz

Camera

300 thousand pixel HD camera

Memory

256MB DDR2,

1GB Nand Flash

Accessories

GPS, Temperature and humidity sensors, High brightness laser pointer

Display

4.3 Inches true color touch LCD, resolution: 480×272

Storage function

GPS coordinate data, time/Date, Temperature/humidity

Interface

SD CARD, USB,

Series port, earphone

Central Frequency

40kHz

Ambient Temperature

-25~70

Relative humidity

0~95%