GTPD-92C Patrol UHF PD tester uses ultra high frequency (UHF) measurement and ultrasonic (US) measurement methods to detect GIS faults. The instrument has multiple functions of PD analysis.
1. Small size, light weight, easy to carry and convenient for field use.
2. Adopting automatic gain control, strong anti-interference ability.
3. UHF measurement adopts waveform mode, statistical mode (peak chart, PRPD chart, HRPS chart), pulse mode.
4. Ultrasonic (US) measurement adopts waveform mode, continuous mode and phase mode.
5. Time domain waveform multi-wave display mode can accurately judge the interference and discharge.
6. The software provides an expert library and an intelligent diagnosis system to accurately determine discharge types.
7. By measuring the pressure of the ultrasonic signal to speculate the discharge intensity, the discharge position can be accurately determined.
8. With data preservation function, data can be reviewed.
9. The inspection data can be exported to the computer through SD card or U disk, so as to complete report.
|
Channels |
One UHF, one US |
|||
Trigger mode |
Internal synchronization, external synchronization and optical synchronization |
||||
Sampling accuracy |
12 bit |
||||
UHF |
Detection bandwidth |
300MHz~1.5GHz |
US |
Frequency |
20~300kHz |
Output interface |
BNC |
Gain |
40dB±1dB |
||
Receiving type |
Antenna |
Peak value sensitivity |
>70dB |
||
Transmission type |
Coaxial cable |
Average value sensitivity |
>50dB |
||
Sensitivity |
<-85dBmW |
Dynamic range |
>80dB |
||
Hard ware |
Display |
4.3 inch TFT true color LCD display, resolution: 480X272 |
|||
Storage |
SD card, standard 16G, maximum support 32G |
||||
Interfaces |
Headphone jack, DC charger input port, LED indicator, RS232 port, USB synchronous port USB2.0, RJ45 network port, SD card slot |
||||
Working power |
Battery powered (16.8V lithium battery), normal working time is about 7 hours, charging time is about 5 hours. |
||||
Size |
235×133×48mm |
||||
Weight |
0.85kg excluding the sensors |